FASTENER BUYING MADE SIMPLE:
IDENTIFYING THE RIGHT UTS SCREW FOR YOUR APPLICATION
This guide will help you understand the variety of Unified Thread Standard (UTS) screws that we carry, along with their functions. UTS screw threads are also commonly called “machine screw threads” or “cap screw threads”. The guide also contains information on the naming structure used for these screw styles to help you navigate the complex nomenclature used in their product descriptions.
WHAT IS UNIFIED THREAD STANDARD (UTS)?
Unified Thread Standard (UTS) is the established standard for matching / mating fastener threads in the US and Canada, ensuring compatibility and consistency across applications. It is primarily used for certain types of screws, nuts, and bolts, providing diameter size and thread count guidelines to guarantee that these parts will work together properly.
UTS makes a further distinction between coarse threads – Unified National Coarse (UNC), and fine threads - Unified National Fine (UNF). Depending upon the job, you will need to consistently use one or the other for matching sets of threads.
See Unified Thread Standard chart for common UNC and UNF sizes (diameter / thread count).
| Screw Size | UNC | UNF |
|---|---|---|
| #0 | 0-80 | |
| #1 | 1-64 | 1-72 |
| #2 | 2-56 | 2-64 |
| #3 | 3-48 | 3-56 |
| #4 | 4-40 | 4-48 |
| #5 | 5-40 | 5-44 |
| #6 | 6-32 | 6-40 |
| #8 | 8-32 | 8-36 |
| #10 | 10-24 | 10-32 |
| #12 | 12-24 | |
| 1/4" | 1/4-20 | 1/4-28 |
| 5/16" | 5/16-18 | 5/16-24 |
| 3/8" | 3/8-16 | 3/8-24 |
| 7/16" | 7/16-14 | 7/16-20 |
| 1/2" | 1/2-13 | 1/2-20 |
SCREWS IN UNIFIED THREAD STANDARD (UTS)
These are among the most common types of fasteners. They are externally threaded fasteners featuring heads in a variety of shapes and styles along with varied mechanisms for driving / installing them. They are used with matching nuts or a pre-tapped matching threaded hole to make a fastening connection and provide superior strength than other screw thread styles.
MACHINE SCREWS
Machine Screws are the most common fasteners used for a matching connection to a nut or threaded hole, especially in sizes under ½”. They consist of an externally, fully threaded body with a head on one end and a flat, blunt tip on the other. Sizes range from 0-80 up to ½-13 and ½-20. Machine screws are available in a wide variety of head and drive styles allowing for different needs based on clearance space required, appearance, and preferred driving / installation method. Stainless steel options are available, with steel parts offered in many finish and color variants.
Example of a Machine Screw Description:
On this part, the “4-40” indicates the diameter size and the thread count. It is a size 4 diameter with 40 threads per inch. The 1” indicates its length. It is driven by a phillips bit, has a pan shaped head, and is made out of steel with a zinc finish.
SEMS SCREWS
SEMS screws are machine screws with lockwashers pre-attached under the head in order to provide a stronger hold or decorative appearance. Variables will include head and drive styles as well as options for different styles or combinations of pre-attached washers. Stainless steel options are available, with steel parts offered in many finish and color variants.
Example of a SEMS Screw Description:
On this part, the “6-32” indicates the diameter size and the thread count. It is a size 6 diameter with 32 threads per inch. The 5/16” indicates its length. This part features a square cone style washer. It is driven by a torx driver / bit, has a pan shaped head, and is made out of steel with a zinc finish.
SOCKET SCREWS
Socket screws are essentially machine screws that are driven by an internal hex-shaped drive (using a hex key or allen wrench) called a socket, as opposed to other drive styles. Socket screws are available in four different head styles - standard socket head; button head; flat head; and low head – with each providing unique benefits for different types of installs. These parts are most common in steel with a black oxide finish, although some styles are also offered in steel / zinc or stainless steel.
Example of a Socket Screw description:
On this part, the “10-32” indicates the diameter size and the thread count. It is a size 10 diameter with 32 threads per inch. The 5/8” indicates its length. It features a button head (similar in shape to a pan head). As a socket screw, it is “socket” driven using a hex key, allen wrench or socket driver.
SERRATED HEX FLANGE SCREWS
Hex head screws with a flanged washer face under the head to increase the bearing surface, and with serrations underneath to provide a stronger hold.
Example of a Serrated Hex Flange Screw description:
On this part, the “1/4-20” indicates the diameter size and the thread count. It has a ¼” diameter with 20 threads per inch. The 1 1/2” indicates its length. These parts have a hex shaped head which is driven with a hex bit / driver. It is made out of steel with a zinc finish.
WING SCREWS
Similar to machine screws except they feature a wing shaped head to allow for hand tightening or loosening rather than requiring a specific driver. Wing screws are available in two styles: “Type D / Stamped” indicates that the wing is made from stamped sheet metal, which is attached around the head of the screw; and “Type A / Cold Forged,” which offers a heavier wing forged from steel.
Example of a Wing Screw description:
On this part, the “10-32” indicates the diameter size and the thread count. It is a size 10 diameter with 32 threads per inch. The 1/2” indicates its length. As a wing screw, it is tightened by hand. It is made out of steel with a zinc finish.
If you have additional questions about unified thread standard screws, we’d love to be a resource for you. Contact us at sales@fastenersuperstore.com, give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!

