FASTENER BUYING MADE SIMPLE:
Identifying the Right Pins for Your Application
This guide will help you understand the various Pins that we carry, and their functions. The guide also contains information on the naming structure used for these Pins to help you navigate the complex nomenclature used in their product descriptions.
Pins are headless fasteners which are inserted into pre-drilled or formed holes. They are used to hold parts in place and maintain proper alignment in machinery. They can be used to stabilize a connection within the part they are inserted into or to hold parts in place. We carry five styles, plus a selection of military spec pins in three styles.
COTTER PINS
A Cotter Pin is a double bodied pin formed from half-round wire, a loop at one end of which provides a head. The finished part has one end of the wire extending beyond the other end, with a chiseled point. Used to anchor various assemblies by inserting into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position. When used with castle or slotted nuts, it becomes a safety locking device.
Example of a Cotter Pin description:
On this part, the “1/2” indicates the nominal diameter of the cotter pin, while the “3 1/2” indicates its length. It is an extended prong cotter pin designed to secure components such as castle nuts, clevis pins, and other fasteners by preventing them from loosening or slipping out of place. It features a looped head and two split prongs of unequal length that are inserted through a hole and bent outward to lock the pin in place. It is made out of steel with a zinc finish.
DOWEL PINS
A Dowel Pin is a solid headless straight pin with a tight diameter tolerance. One end is chamfered with the other end radiused to form a crown. Wide variety of uses, including as a plug gauge, hinge, or shaft. Precise tolerances of dowel pins make them excellent for achieving proper alignment of parts in high-speed assemblies, or as roller bearings in bus/truck wheel housings.
Example of a Dowel Pin description:
On this part, the “1/4” indicates the nominal diameter of the dowel pin, while the “1” indicates its length. It is a dowel pin designed to precisely align and secure components in machinery, tooling, and other assemblies. It features a smooth, cylindrical body with no threads and is typically installed into a closely fitted hole to provide accurate positioning and resist movement between parts. It is made out of alloy steel with a plain finish.
HITCH / BRIDGE PINS
A Hitch / Bridge Pin is a double-bodied pin formed from round wire. The pin is formed in a way so one end is bent approximately 180° so that the two resulting sides meet or come close to meeting. The finished pin has one straight side and an opposite side with one or more turns permanently formed into it.
Example of a Hitch / Bridge Pin description:
On this part, the “.092” indicates the nominal wire diameter of the hitch pin, while the “2” indicates its length. It is a hitch pin, also known as a bridge pin, designed to secure components such as clevis pins, hitch pins, and other fasteners by preventing them from slipping out of place. It features a bent wire body with a looped end and a spring-like retaining section that clips into place for easy installation and removal without tools. It is made out of steel with a zinc finish.
ROLL / SPRING PINS
A Roll / Spring Pin is a hollow, headless pin, slit longitudinally, having controlled length with chamfered ends, formed to a diameter somewhat greater than that of the hole into which it is to be assembled.
Example of a Roll / Spring Pin description:
On this part, the “1/4” indicates the nominal diameter of the roll pin, while the “1 1/2” indicates its length. It is a roll pin, also known as a spring pin, designed to secure and align components in machinery and other assemblies. It features a hollow, cylindrical body with a longitudinal slot that allows it to compress during installation and exert outward spring pressure against the walls of a drilled hole, creating a secure friction fit. It is made out of steel with a plain finish.
COILED SPRING PINS
A Coiled / Spring Pin is a hollow, headless pin with chamfered ends, formed or wrapped from steel sheet to a diameter slightly greater than the basic. It is distinguishable from the slotted pin variety in that it has multiple walls. Upon installation, the pin diameters contract and press against the sides of the hole. This outward pressure holds the pin in place.
Example of a Coiled / Spring Pin description:
On this part, the “7/32” indicates the nominal diameter of the coiled spring pin, while the “1 1/2” indicates its length. It is a medium-duty coiled spring pin designed to secure and align components in machinery and other assemblies. It features a hollow, cylindrical body made from multiple layers of coiled steel that compress during installation and exert outward spring pressure against the walls of a drilled hole, creating a secure friction fit. Its coiled design helps absorb shock and vibration while distributing stress evenly. It is made out of steel with a thermal black and oil finish.
If you have additional questions about any of these pin styles, we’d love to be a resource for you. Contact us at sales@fastenersuperstore.com, give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!

