FASTENER BUYING MADE SIMPLE:
Identifying the Right Hex Head Bolts in Unified Thread Standard (UTS) for Your Application
This guide will help you understand the various hex and square head bolts that we carry, and their functions. The guide also contains information on the naming structure used for hex and square head bolts to help you navigate the complex nomenclature used in their product descriptions.
What is Unified Thread Standard (UTS)?
Unified Thread Standard (UTS) is the established standard for matching / mating fastener threads in the US and Canada, ensuring compatibility and consistency across applications. It is primarily used for certain types of screws, nuts, and bolts, providing diameter size and thread count guidelines to guarantee that these parts will work together properly.
UTS makes a further distinction between coarse threads – Unified National Coarse (UNC), and fine threads - Unified National Fine (UNF). Depending upon the job, you will need to consistently use one or the other for matching sets of threads.
See Unified Thread Standard chart for common UNC and UNF bolt sizes.
Most bolt types come in UTS. There are slight differences within this grouping however, with the following types falling under the category of hex head bolts:
| Screw Size | UNC | UNF |
|---|---|---|
| 1/2" | 1/2-13 | 1/2-20 |
| 9/16" | 9/16-12 | 9/16-18 |
| 5/8" | 5/8-11 | 5/8-18 |
| 3/4" | 3/4-10 | 3/4-16 |
| 7/8" | 7/8-9 | 7/8-14 |
| 1" | 1-8 | 1-14 |
| 1 1/8" | 1 1/8-7 | 1 1/8-12 |
| 1 1/4" | 1 1/4-7 | 1 1/4-12 |
| 1 3/8" | 1 3/8-6 | 1 3/8-12 |
| 1 1/2" | 1 1/2-6 | 1 1/2-12 |
Heavy Hex Bolts
Heavy Hex Bolts offer a wider hex head than standard hex bolts, providing a larger wrenching area for greater torque. Used in heavy duty industrial work.
Example of a Heavy Hex Bolt description:
On this part, the “1/2-13” indicates the diameter size and the thread count. It is a 1/2" diameter with 13 threads per inch. The 3 1/2” indicates its length. It is driven by a hex driver, and is made out of Grade B7 Steel with a Plain finish.
Hex Cap Screws
Hex Cap Screws are the most common and economical style of hex head bolts. They are usually partially threaded. They feature a washer face under the head, smaller than the hex and come in a wide variety of steel and stainless-steel grades.
Example of a Hex Cap Screw description:
On this part, the “5/16-18” indicates the diameter size and the thread count. It is a 5/16” diameter with 18 threads per inch. The 2” indicates its length. It is driven by a hex driver, has a hex shaped head, and is made out of 316 stainless steel with a plain finish.
Hex Flange / Frame Bolts
Hex Flange / Frame Bolts are hex head bolts featuring a flange around the bottom of the head, creating a wider bearing surface, and eliminating the need for a washer. Commonly used on truck frames.
Example of a Hex Flange / Frame Bolt description:
On this part, the “5/16-18” indicates the diameter size and the thread count. It is a 5/16” diameter with 18 threads per inch. The 1/2” indicates its length. It is driven by a hex driver, has a hex flange shaped head, and is made out of Grade 8 steel with a black phosphate finish.
Hex Machine Bolts
Hex Machine Bolts are low carbon steel hex head bolts with a galvanized finish for protection in corrosive environments. Body tolerances are not as tight as those of a hex cap screw.
Example of a Hex Machine Bolt description:
On this part, the “5/8-11” indicates the diameter size and the thread count. It is a 5/8” diameter with 11 threads per inch. The 4 1/2” indicates its length. It is driven by a hex driver, has a hex shaped head, and is made out of steel with a hot dip galvanized finish.
Hex Tap Bolts
Hex Tap Bolts are always fully threaded and most commonly used in holes tapped to UTS. They can also be used with a UTS nut when full threading is required. Available in a variety of steel grades or in stainless steel.
Example of a Hex Tap Bolt description:
On this part, the “1/4-28” indicates the diameter size and the thread count. It is a 1/4” diameter with 28 threads per inch. The 2 3/4” indicates its length. It is driven by a hex driver, has a hex shaped head, and is made out of Grade 8 steel with a zinc yellow finish.
Structural Bolts
Made from medium carbon steel (grade A325) with a plain or galvanized finish, Structural Bolts have a hex head, are heat treated and used on steel structural joints in heavy construction.
Example of a Structural Bolt description:
On this part, the “1/2-13” indicates the diameter size and the thread count. It is a 1/2” diameter with 13 threads per inch. The 3” indicates its length. It is driven by a hex driver, has a heavy hex shaped head, and is made out of A325 steel with a hot dip galvanized finish.
Square Head Machine Bolts
Finally, there is one category that features a square shaped head: Square Head Machine Bolts.
Made of low-grade steel with a plain or zinc finish, the square head design creates a larger bearing surface for increased torque when wrenching.
Example of a Square Head Machine Bolt description:
On this part, the “1/2-13” indicates the diameter size and the thread count. It is a 1/2” diameter with 13 threads per inch. The 1” indicates its length. It is driven by a square wrench, has a square shaped head, and is made out of steel with a plain finish.
If you have additional questions about hex and square head bolts, we’d love to be a resource for you. Contact us at sales@fastenersuperstore.com, give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!

