FASTENER BUYING MADE SIMPLE:
Identifying the Right Rivets for Your Application
This guide will help you understand the various Additional Rivet Styles that we carry, and their functions. The guide also contains information on the naming structure used for these rivets to help you navigate the complex nomenclature used in their product descriptions.
In addition to blind rivets, there are other styles that provide uses for different applications, requirements, or installation limitations. They include:
BULBING TYPE BLIND RIVETS
Bulbing Type Blind Rivets feature three longitudinal slits in the body that expand as the rivet is installed, creating large bulbs, or petals, on the blind side. The larger holding area allows for use in oversized or imperfect holes. Requiring less pulling force during installation, bulbing type blind rivets work well with thin, soft, or brittle materials.
Example of a Bulbing Type Blind Rivet description:
On this part, the 5/32” is the diameter of the body of the rivet being installed into the hole. .039”-.275” is the grip range, or range of material thicknesses that this rivet can cover. It is a bulbing type blind rivet, meaning it forms a wide bulb on the blind side during installation to distribute the load over a larger surface area and provide a secure fastening connection. It has an aluminum body and an aluminum mandrel (the part that is used to set the rivet during installation). It has a black anodized finish and a barrel length of .739”.
DRIVE PIN RIVETS
Drive Pin Rivets are a style of rivet which uses a self-contained pin inside the body of a tubular rivet and is installed with a hammer to the front end, pushing the pin level with the head and expanding the back end to create a tight connection.
Example of a Drive Pin Rivet description:
On this part, the 1/8” is the diameter of the body of the rivet being installed into the hole. The 3/16” indicates the rivet length. It is a universal head drive pin rivet, meaning it has a rounded, protruding head and is installed by driving the pin into the rivet body to expand and secure it in place. It has an aluminum body and a stainless steel pin (the part that is driven into the rivet during installation).
MULTI GRIP RIVETS
Designed to provide maximum clamping action while covering a wider range of material thicknesses or grip ranges, they also have the ability to expand throughout the body diameter, allowing them to fill out larger or uneven holes.
Example of a Multi Grip Rivet description:
On this part, the 1/8” is the diameter of the body of the rivet being installed into the hole. .125”-.312” is the grip range, or range of material thicknesses that this rivet can cover. It is a low profile multi-grip blind rivet, meaning it has a low-profile head that sits close to the material surface and is designed to accommodate a wider range of material thicknesses. It has an aluminum body and a steel mandrel with a zinc finish (the part that is removed during installation).
STRUCTURAL RIVETS
Structural Rivets are rivets designed for structural work, including dome head, water resistant and protruding head styles.
Example of a Structural Rivet description:
On this part, the 1/4” is the diameter of the body of the rivet being installed into the hole. 0.350”-0.625” is the grip range, or range of material thicknesses that this rivet can cover. It is a protruding head structural rivet, meaning it has a raised head designed to provide a strong, secure fastening connection in structural applications. It has an aluminum body and an aluminum mandrel (the part used to set the rivet during installation).
BACK-UP WASHERS FOR RIVETS
Washers that are used to improve a rivet connection when more bearing surface is required or when holes are larger than required or not perfectly aligned.
Example of a Rivet Back Up Washer description:
On this part, the “5/32” indicates the nominal rivet diameter it is designed to accommodate. It is a back up washer with an outside diameter of 7/16” and a thickness of .059”. It features a flat, round body with a centered hole that provides additional support on the blind side of a rivet installation, distributing the load over a wider surface area and helping prevent the rivet from pulling through the material. It is made out of aluminum with a plain finish.
If you have additional questions about additional rivet styles, we’d love to be a resource for you. Contact us at sales@fastenersuperstore.com, give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!

